Frontends

A frontend section defines the IP addresses and ports that clients can connect to. You may add as many frontend sections as needed to expose various websites or applications to the internet.

Frontend configuration example Jump to heading #

The following configuration sample defines a frontend with the label myfrontend:

haproxy
frontend myfrontend
  # Set the proxy mode to http (layer 7) or tcp (layer 4)
  mode http
   
  # Receive HTTP traffic on all IP addresses assigned to the server at port 80
  bind :80
   
  # Choose the default pool of backend servers
  default_backend web_servers

haproxy
frontend myfrontend
  # Set the proxy mode to http (layer 7) or tcp (layer 4)
  mode http
   
  # Receive HTTP traffic on all IP addresses assigned to the server at port 80
  bind :80
   
  # Choose the default pool of backend servers
  default_backend web_servers

The label myfrontend is mostly for readability, but it does come into play when defining stick tables and categorizing traffic metrics. It should consist of only upper or lowercase letters, digits, dashes, underscores, dots, and colons.

In this example:

• The mode sets the proxy mode to http, which enables deeper inspection and routing of HTTP messages.
• The bind sets the IP address and ports that clients can connect to.
• The default_backend sets which backend to send requests to.

Listen on multiple IP addresses and ports Jump to heading #

A frontend may listen on multiple addresses and/or ports. In the following configuration sample, myfrontend listens on two IP addresses at port 80:

haproxy
frontend myfrontend
  mode http
  bind 192.168.1.5:80
  bind 192.168.1.6:80
  default_backend web_servers

haproxy
frontend myfrontend
  mode http
  bind 192.168.1.5:80
  bind 192.168.1.6:80
  default_backend web_servers

In the following configuration sample, myfrontend listens on all IP addresses at port 80:

haproxy
frontend myfrontend
  mode http
  bind :80
  default_backend web_servers

haproxy
frontend myfrontend
  mode http
  bind :80
  default_backend web_servers

In the next sample, the frontend listens on both ports 80 and 443. The http-request redirect directive redirects all clients from HTTP (port 80) to HTTPS (port 443).

haproxy
frontend myfrontend
  mode http
  bind :80
  bind :443 ssl crt /site.pem
   
  # Redirect HTTP to HTTPS
  http-request redirect scheme https unless { ssl_fc }
   
  default_backend web_servers

haproxy
frontend myfrontend
  mode http
  bind :80
  bind :443 ssl crt /site.pem
   
  # Redirect HTTP to HTTPS
  http-request redirect scheme https unless { ssl_fc }
   
  default_backend web_servers

You can also specify a range of ports. In the following example, the load balancer listens on any port between 8080 and 8090, inclusive:

haproxy
frontend myfrontend
  bind 192.168.1.5:8080-8090
  default_backend web_servers

haproxy
frontend myfrontend
  bind 192.168.1.5:8080-8090
  default_backend web_servers

To listen on all IPv4 and IPv6 addresses, use [::] as the address and specify the v4v6 argument:

haproxy
frontend myfrontend
  bind [::]:80 v4v6
  default_backend web_servers

haproxy
frontend myfrontend
  bind [::]:80 v4v6
  default_backend web_servers

Use multiple frontends for different traffic types Jump to heading #

In the next configuration sample, frontend foo.com has been configured to receive HTTP traffic. It specifies a mode of http in order to enable Layer 7 processing of HTTP messages.

Frontend db.foo.com has been configured to receive TCP traffic, in this case MySQL traffic at port 3306, and cannot make use of Layer 7 inspection and routing. Therefore, mode is set to tcp, which enables a simpler Layer 4 proxying.

haproxy
frontend foo.com
  mode http
  bind 192.168.1.5:80
  default_backend foo_servers
frontend db.foo.com
  mode tcp
  bind 192.168.1.15:3306
  default_backend db_servers

haproxy
frontend foo.com
  mode http
  bind 192.168.1.5:80
  default_backend foo_servers
frontend db.foo.com
  mode tcp
  bind 192.168.1.15:3306
  default_backend db_servers

Use conditionals to forward traffic to different backends Jump to heading #

You configure a frontend to send traffic to a backend by using the default_backend directive. However, you can choose a different backend with the use_backend directive followed by a conditional statement. These conditionals are called ACLs.

In the next configuration sample, frontent foo_and_bar listens for HTTP traffic and uses use_backend to send traffic to backend foo_servers when the host HTTP header matches foo.com. Otherwise, traffic goes to the backend named bar_servers.

haproxy
frontend foo_and_bar
  mode http
  bind :80
  use_backend foo_servers if { req.hdr(host) -i foo.com }
  default_backend bar_servers

haproxy
frontend foo_and_bar
  mode http
  bind :80
  use_backend foo_servers if { req.hdr(host) -i foo.com }
  default_backend bar_servers

The if statement checks whether the string returned by the req.hdr(host) fetch matches the string foo.com. The -i flag ignores case during string matching. There’s also an unless statement available, which checks whether a condition is false.

See also Jump to heading #

• mode
• bind
• default_backend
• use_backend
• http-request redirect